弧形辊安装                                                               

 正确的安装方法可使弧形辊达到最佳的展平效果，

基材通过弧形辊的弧面，通常要有较长的导入距离 B和较短的导出距离

A ，距离 B 通常是距离 A 的2-3 倍左右，尺寸A要接近2.5倍弧形辊的直径D。

提示：安装弧形辊时，请确保弯辊和基材是对齐和垂直水平的。

Installation 

Optimum effect will be achieved by mounting the

spreader roll .

Long entry distance B short output distance A The material web should always pass over the concave side of the Bowed Roller Dimension”B” should always be 2-3 times the exit span “A”. Dimension “A” should be approximately two and a half times of the Bowed Roller.

Note: When install the Bowed Roller please ensure that it is aligned both vertically and horizontally onto the material web As shown in diagram

上一文章：弧度方向调节

下一文章：弧形辊包角选择